最新消息

最新消息

展会

快   讯

The ENOTEC Analyser Systems COMTEC^® 6000 and OXITEC^® 5000 have successfully passed YOKOGAWA's Host Interoperability Support Test (HIST).  

This compliance covers ENOTEC's range of O₂ respectively O₂/COe Analyser Systems OXITEC^® 5000 and COMTEC^® 6000 together with their Fieldbus interfaces which have registered full compatibility with YOKOGAWA's process control equipment product line.

For the list of devices, which have passed the HIST, please click here. 

For more than 5 years CEMTEC^® high temperature analyser systems have been operating successfully without problems, in cement plants worldwide providing reliably and continuously, accurate current measuring values under the arduous high temperature and high dust loading conditions encounter in rotating kiln inlets.

The special features provided by a CEMTEC^®  high temperature analyser system can be seen during actual operation in a cement plant, in the short film which can be downloaded here (approx. 3.8 MB).

May 2009

ACHEMA 2009 - Positive Signals in spite of Difficult Times

The great number of visitors to the ENOTEC stand and the high quality of discussions and contacts made during the exhibition, have made the participation at ACHEMA 2009 a success despite the difficult economical environment.

One of the top subjects of ACHEMA 2009 was Process Efficiency whose increase is one of the most important targets of the ENOTEC product development department, especially in such energy-intensive sectors as the power generation or the chemical and petroleum production where improvement in efficiency yields significant energy and cost saving which can fast exceed the investment costs many times over.  

Energy saving and with it the associated cost saving are - especially in this economically tough environment - major objectives and visitors to the ENOTEC stand revealed their confidence that the Analyser Systems of ENOTEC GmbH can offer an important contribution to these objectives.

March 2009

As co-exhibitor on the FOUNDATION Fieldbus^TM communal stand (Hall 7, Stand B09), we would like to invite you to the Hannover Fair (INTERKAMA) from 20th to 24th of April 2009.

Analyser Systems for flue gas and process gas analysis are continually developing and are providing more and more information as requirements changes. For reasons of process optimisation, it is important to make the information readily available to the control systems personnel "just in time". The FOUNDATION Fieldbus technology offers an information infrastructure which satisfies all requirements concerning flexibility and speed of response.

As ENOTEC GmbH has been a member of FOUNDATION Fieldbus^TM since June 2008 it is participating, as co-exhibitor on the FOUNDATION Fieldbus^TM communal stand (Hall 7, Stand B09) at the Hannover Fair. We will be pleased to meet you personally and invite you to make an appointment with one of our product experts at the Hannover Fair (info@enotec.de or ++49 (0)2264 4578 0).

February 2009

MCERTS 2009

ENOTEC will be exhibiting at MCERTS 2009 on Stand 18. At this year’s event we will be demonstrating SYSTEC, our CEMS system building capability. This will be complemented by the attendance on both days by our SYSTEC product manager who will be able to give expert advice and application details of the many systems supplied to customer’s world wide.

Also on display will be the well proven and MCERT approved OXITEC^® Oxygen analyser, industry standard for Power Plant and Refinery applications.

Well worth attending will be our daily workshop presentation SYSTEC Process and Emission Measurement Systems.

December 2008

Since November 2008 
ENOTEC GmbH is member 
of HART Communication Foundation

December 2008

Presentation of the CEMTEC^® Kiln Inlet Measurement System at the CEMENTEX 2008 Exhibition in Tehran, Iran

From 4th to 7th of December 2008 ENOTEC GmbH together with their Irani partner ZIST AP Ltd exhibited at the 1st International Exhibition for Cement & Concrete Industry, Technology, Machinery & Equipment (CEMENTEX) in Tehran. The centre stage was taken by the CEMTEC^® Kiln Inlet Measurement System, but also on display and attracting great attention was the ENOTEC System Technology (SYSTEC) Division with its Process and Emission Measuring Systems for large combustion applications and boilers of every description.

During the course of the seminar programme, ENOTEC’s graduate engineer, Oliver Klaus, presented ENOTEC’s complete solution SYSTEC for all combustion applications and the many advantages of the CEMTEC^® High Temperature Gas Sampling Probe with InSitu oxygen analyzer, whose mechanical cleaning allows the uninterrupted sampling and analysing of process gas over long periods. 

Following the great success enjoyed by ENOTEC GmbH and ZIST AP Ltd. at this year’s exhibition, they will certainly participate in CEMENTEX next year. 

October 2008

ENOTEC is Member of Fieldbus 
Foundation^TM …

… and the ENOTEC analyser systems OXITEC^® 5000 (O₂) and COMTEC^® 6000 (O₂/COe) - both for InSitu measurement in flue gas channels - are registered at FOUNDATION Fieldbus^TM. Therefore the benefits of FOUNDATION Fieldbus^TM can be used with devices of both series.

You can get more information about our registered products, if you click here.

2008 年4月

CEMTEC^® 展于汉诺威展会

2008年4月21日—25日的汉诺威展会上展出了首台全功能的 CEMTEC^® 采样探头. 该探头（可转动，伸缩和吹扫）可以当场演示，从而引起参观者的极大兴趣。

CEMTEC^® 是一种用于旋转窑炉的新型分析系统，它能够在诸如水泥窑炉的恶劣情况下，以及其他的困难条件下无需维护地正常工作若干个月。

2008 年2月

OXITEC^® 500E 得到TÜV 认证 

2008年1月29日，机柜式氧气分析系统 OXITEC^® 500E 得到TÜV 认证，它符合 DIN EN 14181 和 DIN EN ISO 14956 各项标准.

TÜV 证书的德文和英文PDF文件可以在此下载 here (约 141 KB) .

2008年2月

汉若威展会 
电厂技术
汉若威, 德国

安诺泰公司将在2008年4月21日-25日的汉诺威展会上展出适用电厂的最新产品开发信息。这个新的国际贸易展览会包括未来电力市场最新技术，体制和有关的崭新概念的介绍，即电厂的筹建，技术和运作等内容。

只有通过能源的高效率利用和更多的环保措施，才能满足全球对能源日益增加的需求和对环境保护的要求，这些都涉及到电厂的运行。

我们的展位在27厅 B37，欢迎参观，面对未来的这些挑战，我们希望能够与您共同努力。.

有关详细信息请点击上面的会标。

您可以在/2007/2006/2005/2004/2003/2002/2001年度的 文档 中找到有关的新的报道